Set Reinforcement Turbo Td04 Sfm230 Alfa Romeo Fiat Abarth 1.4 Multiair + 235 CV

Set reinforcement turbo td04 sfm230 alfa romeo fiat abarth 1.4 multiair + 235 cv. This product sheet has been automatically translated. If you have any questions, please do not hesitate to contact us. Kit turbo td04 / td04l sfm230 for 1.4 litre multi-air fiat engine. A fascinating, powerful and reliable engine, consistent with fiat quality that for many years has developed and produced small and medium-sized gasoline engines capable of delivering exciting power in sports versions. Already from the 1.4 turbo engines installed on the fiat uno then the punto gt, the passion for the elaborations that led our company to provide specific kits according to the desired use was born. Projected turbo kits to get high drive torques with essential powers and kits aiming to reach even 60% higher power than nominal values. The decision to provide specific kits according to the needs was born to satisfy those who used the cars on track rather than for slalom or side-by-side racing. In these disciplines, the engine must obviously have a very different torque and power. After the success achieved in recent years with the kits sp170 and sp190 for the "old" 1.4 engine, sopo decided to develop a turbocharger td04 / td04l in the form of a complete kit to provide to enthusiasts and operators of the sector. Version sfm230 multi-air - it is considered a complete kit, because in addition to the turbocharger, it includes the downline hose and also a set of adapters for its installation and the water circuit exclusion kit.

The kit allows you to reuse the existing oil pipe (for alfa romeo mito, giulietta; fiat punto evo, bravo, ; lancia delta; abarth punto evo). The power that can be obtained by operating at a pressure of approximately 1.1 bar is 235 hp with a drive torque of approximately 25 kg to more than 31. The kit obviously requires a remapping of the control unit. If desired, it is possible to prepare the engine to achieve a power of 260 hp against an overcharge pressure of about 1.7 bar, but it is necessary to make important modifications to the engine such as cast pistons, cap joints, increased injectors.

The sfm230 is an oil-cooled turbo td04/td04l, it is equipped with a hisi turbine crankcase (good temperature resistance with the ability to withstand maximum values around 860 °c with peaks of 920 °c) and a pneumatic pressure regulator directly connected to the compressor (not to use the air pressure regulator connected to the control unit - a simple solution capable of reducing adjustment difficulties). Saito provides the sfm230 scorpio kit equipped with a 1.1 bar waste door adjustment actuator. This type of "rigid" actuator allows a direct control of the pressure between the compressor and the actuator or without the help of the cyclic valve called pierburg (the latter must however remain electrically connected). If you want to manage the pressure via the electric valve (pierburg), you have to install a low pressure actuator (0.6 bar) which must be ordered with the kit at a slightly higher price. The sfm230 kit is unparalleled: in fact it is now the cheapest and most efficient available on the market and it is easy to install as mentioned above the only modification that is necessary is the remapping of the control unit it is however suggested to always refer to a capable trainer, knowo historically provides the most famous and famous tuners in italia and abroad by providing high quality products by offering kits made with td04l/td04 turbines produced by mitsubishi according to the highest standards and with materials specifically developed for racing - we do not use Chinese products in our range!

Kit turbo td04 / td04l sfm230 for 1.4 liter multiar fiat engine. For alfa romeo mito, giulietta; fiat punto evo, bravo, ; lancia delta; abarth punto evo. 1 inlet O-ring of the compressor. Gas inlet flange stud bolts n.

8 stainless steel self-locking nut. 1 turbine inlet flange joint.

4 screws for descent hose. 1 O-ring of the water stopper. 1 tube for water stopper.

2 stainless steel clamps for water stopper. 2 oil drain adapter screws. 1 oil adapter with perforated screw (nut). 3 oil adapter sealing washers.

Installation of an aircraft compressor wheel from a forged bar (for increased air mass and reliability related to rotor speed). Downstream pipe with 200 cell catalyst. You will find the complete kit in our store. The control point is very important, please always close it, just click the pay button now and on the next page, select the payment method. Saturday, Sunday and all the days indicated in the red calendar are not considered working days.

You can change this address when ordering. Removal of the package when you retrieve a package, always make sure that it has not been falsified, that it does not have an implausible weight, that there are not two different types of strips to close, that the name on the transport document corresponds to the name on the package, if you have doubts about integrity always write on the document "it is accepted subject to verification of the integrity of the content", because if you sign the document unreservedly you declare that the package is intact and that the content is perfect, so once signed in case of damage the object is not refundable. Telephone number it is important to communicate a fixed or mobile phone number to be traced, by us or by the carrier, when delivering the package in case of a problem. The invoice must be requested before or at the time of purchase, not after.

The purchased products will be delivered to the destination address indicated by the customer at the time of purchase. The customer is advised to always sign the carrier's transport letter "subject to verification of the integrity of the contents". Claims concerning damage to equipment caused by mail not signed with the above note cannot be resolved. The inventories are not directly connected to the online site, so it is possible that some products on the site are not currently available in the warehouse. In case of unavailability, even temporary, in the warehouse of the goods requested, here.

Any delay does not result in the cancellation of the order. Once the order has been placed, delivery cannot be refused. Any inventories and returns will be invoiced exclusively to the customer. This in order to fully satisfy the condition of art. 53 of Legislative Decree n.

It is the duty of the purchaser to verify the integrity of the material received within and at the latest 3 days (natural and consecutive) from the date of arrival of the product. Service srl will no longer be liable for damage, lack of equipment or spare and replacement parts. Service srl reserves the right to legally prosecute any violation and abuse, in the interest and for the protection of all consumers. Il di service srl via di vale foresta, 4b - 00062 bracciano (rm) tva number it03598111007. Home Features Car Batteries Kit Discs & Plates Description Payments Shipping Conditions of Sale Kit includes: modified turbo: n.

1 mitsubishi turbo adapters turbo h2o n. 1 water return plug n.

1 tube for oil water stopper oil outlet joint n. Package Removal Phone Number Attention! The item "set reinforcement turbo td04 sfm230 alfa romeo fiat abarth 1.4 multiair + 235 cv" has been on sale since Tuesday 15 June 2021. It is in the category "auto, motorcycle - parts, accessories\auto\ spare parts\turbos, superchargers\turbos".Service" and is located in/in bracciano. This item can be shipped to the following countries: america, europe, asia, australia.

Bundle insertion: without
insertion code: product-01002
country of manufacture: italie
units of measurement: unità
mark: sapo
original alternative code oe/oem: not applicable
old/modern car: modern car spare parts