Set Strengthening Turbo Td04 Sfm230 Scorpio Fiat Abarth 500 1.4 + Jet 230 CV

Set strengthening turbo TD04 sfm230 scorpio fiat abarth jet 500 1.4 + 230 cv. This product page has been automatically translated. If you have questions, feel free to contact us.

Kit turbo power TD04 sfm230 scorpion fiat abarth 500 1.4 t-jet + 230 cv. Turbo kit TD04 / td04l sfm230 motor fiat 1.4 liter T-jet fascinating engine, powerful and reliable, in line with the fiat quality which, for many years, developing and producing petrol engines of small and medium capable of providing an exciting power in the sporting versions. Already from the 1.4 turbo engines installed on fiat uno then punto gt, passion for the elaborations that led our company to provide specific kits depending on the intended use was born. The turbo kits should obtain high drive torques with very significant powers and kits to achieve even higher powers of 60% to the nominal values.

The decision to provide specific kits as required was born to satisfy those who used the cars on the track rather than for slalom racing or speed side. In these disciplines, the engine must obviously have a very different torque and power. After the success achieved in recent years with the SP170 kits and sp190 for the \Sfm230 your T-jet \supply and return of oil (to 500 and punto abarth). The power that can be obtained by operating at a pressure of about 1.1 bar is at 235 hp with a torque delivery that passes about 25 kg to more than 31. The kit obviously requires a remapping unit control. If desired, it is possible to prepare the engine to achieve a power of 260 hp against a boost pressure of approximately 1.7 bar, but it is necessary to make significant changes to the engine such as molded pistons, a cylinder head gasket of raised injectors. The sfm230 is a turbo TD04 / td04l oil-cooled, it is equipped with a turbine housing Hisi (good resistance to temperature with an ability to withstand maximum values around 860 ° C with peaks of 920 ° c) and a pneumatic pressure regulator directly on the compressor (for not using the air pressure regulator connected to the control unit - a single solution capable of reducing the adjustment difficulty). Saito provides the kit sfm230 scorpio equipped with an adjusting actuator of the drain valve 1.1 bar.

This type of \If you want to handle the pressure via the electrical duty cycle valve (Pierburg), you must install a low-pressure actuator (0.6 bar) to be ordered with the kit at a slightly higher price. The sfm230 kit is unparalleled: in fact, it is now the cheapest and most efficient on the market and is easy to install as mentioned above the only change that is needed is the remapping of the control unit, however, you should always refer to an able coach, saito historically provides the most famous tuners and the most renowned in Italy and abroad by providing high quality products by offering kits manufactured with td04l turbines / TD04 produced by mitsubishi under the highest standards and with materials specifically developed for the race - we do not use Chinese products in our range! Kit turbo TD04 / td04l sfm230 for 1.4-liter engine fiat - punto and 500 fiat abarth, fiat tipo. 1 Mitsubishi turbo retaining sleeve of the actuator b. 1 flange turbine manifold studs of the inlet flange of gas n.

1 attached to turbine inlet flange n. 1 downpipe without catalyst 4 screws to downcomer n.

1 return plug water n. One O-ring of the water n cap.

1 cap water distribution n. 1 water seal tube clamp stainless steel n. 1 adapter No oil drain. 2 attached Release oil n. 2 adapter screw oil drain n.

1 oil inlet adapter n. 1 adapter perforated screw oil (nut) n. 4 injectors 390 cc n. Pressure sensor 1 sensor n. Those proposed by Saito are original Bosch, the highest quality available on the market today!

The control is very important, always close it, simply click on the pay now button and on the next page, choose the method of payment. On Saturdays, Sundays and every day in red on the calendar are not considered business days. You can change this address when ordering.

Removing the parcel when you retrieve a package, always make sure it has not been tampered with, he did not improbable weight, there are no two different types of bands to close, that the name on the transport document matches the name on the package, if you have any doubts about the integrity always write on the document \document without reservation you declare that the package is intact and the contents perfect, so once signed for damage the object is not refundable. Phone it is important to communicate a landline or mobile number to trace, by us or by courier, on delivery of the parcel in case of problems. The invoice must be made before or at the time of purchase, not after. The goods purchased will be delivered to the customer indicated by the destination address when purchasing. It is advised customers to always sign the waybill of the carrier \Claims for damage to the equipment by the unsigned letter with the above note can not be resolved.

Inventories are not directly connected to the website, so it is possible that some products on the site are not currently available in the warehouse. In case of unavailability, even temporary, in the warehouse of the requested goods it. Any delay does not cause the cancellation of the order.

Once the order is placed, delivery can not be denied. All stocks and returns will be charged entirely to the customer. This is to fully satisfy the condition of art. 53 of Legislative Decree n. It is the buyer's responsibility to check the integrity of the material received within a maximum of 3 days (natural and consecutive) from the arrival of the product.

Service srl will not be responsible for damage, lack of equipment or spare parts and replacement. Service srl reserves the right to legally pursue any violation and abuse, in the interest and for the protection of all consumers. It di Service srl Via di foresta valley, 4b - 00062 bracciano (rm) vat number it03598111007.

The item \\ turbo \The seller is \This item can be shipped to the following countries: america, europe, asia, australia.

insertion bundle: without <\/ li>
insertion code: product-00438 <\/ li>
manufacturing country: Italy <\/ li>
measurement units: unità <\/ li>
brand: Saito <\/ li>
manufacturer part number: sfm230 scorpio <\/ li>
quantitée 1 <\/ li>
classic / modern car: Parts modern car <\/ li>
other identification code: TD04 <\/ li> <\/ Ul>